|
Description:
Live video transmission for operation over twisted pair or Category
5 cables.
Both the TR515 and TR560 are designed for
operation over Category 2, 3, 4 or 5 twisted pair cable and require
the use of a Nitek transmitter unit. The units work equally well
over existing communication and computer network spare pairs, or new
cable installations.
Advanced receiver electronics provide complete
immunity from ground loop, hum and noise to produce maximum video
quality with virtually no loss. A dip switch on the unit provides
precise adjustment of gain and frequency compensation, allowing the
system to be “fine-tuned” for any cable. This unique feature
provides easy adjustment for optimum performance over the entire
operating range and also allows cable length to be estimated with a
wide safety margin, when bidding CCTV twisted pair transmission
jobs.
The TR515 and TR560 include
the receiver and a power supply for the receiver. Complete systems
including the receiver, transmitter and power supplies are
available.
Features:
- Active electronics compensate for frequency and
level loss
- Built-in protection from power surges, transients, static or
other electrical interference
- High resolution color or monochrome video
- Complete immunity to ground loop; video and AC can be run in
a common raceway, where allowed
- Video can be run in the same cable with telephone
and computer signals
- Weatherproof design
- Easy to install
Receiver Unit
| Size w/mounting
tabs |
1.6"H x 4.3"W x 2.4"D |
| Power Requirements |
12 to 24 VAC or VDC @ 30mA
(wall transformer provided with unit) |
| Input |
Balanced low voltage current loop |
| Output |
1 vpp composite video
monochrome or color |
| Common Mode Rejection |
>70dB |
| Video Format |
RS170, NTSC, PAL, SECAM, CCIR (Color or
B/W) |
| Operating Frequency |
DC to 10 MHz |
| Shipping Weight |
2 lbs |
 |