The 4PSWT is a four position alarming, homing,
bypassing sequential video switcher. One alarm input via a rear cage
clamp connector allows homing to camera 4 in a manual mode. Upon
release of the alarm input, the switcher continues from where it
left off prior to the alarm occurrence. Front panel LED indicators
show which camera is currently being homed. The three position
toggle switches allow instant manual homing, camera bypassing except
upon alarm, and auto sequencing mode. There is a recessed Dwell pot
on the front panel to adjust the dwell time from approximately 1
second to 30 seconds. The 4PSWT is powered by 9-12VDC and is
supplied with a UL approved wall transformer.
|
