|
With enhanced microprocessor-based technology, the CS 5000 provides
improved detection performance and increased operating flexibility. It
offers many of the same features found on our advanced walk-through
units and can be used in virtually any security checkpoint application.
The CS 5000 is an affordable unit for the budget-conscious.
Key Features
Overhead Control Unit: LCD Display, alarm lights, LED bar
graphs and control touchpads plus all wiring, connections and
electronics are integrated into a single lockable overhead compartment
which eliminates exposure of wires and external control box.
Microprocessor Controlled: State of the art microprocessors
ensure maximum sensitivity and flexible programming.
Detection Field: Unique coil design offers multidimensional
detection field with total uniformity both horizontally and vertically.
This design, plus a choice of three levels of ankle level boost,
eliminates traditional hot spots and weak signals. Target detection is
precise regardless of its location in the archway.
Audible and Visual Alarms: Audible alarm and red LED Alarm
Lights indicate metal has been detected. The Red LED alarms light
appears even when the audible alarm has been turned OFF. Green READY
LIGHT indicates the unit has full power and is ready for operation.
Specifications:
Operating Temperatures
-4°F (-20°C) to + 158°F (70°C); Humidity to 95% non-condensing
Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring,
switching or adjustments required. Power supply meets UL, CSA, TUV and
VDE standards.
Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided by
Enclosures," CEI 529.
Tamper-Proof
Dual-level access codes required to set or change all sensitivity
settings and detection programs; one level for use by supervisors in
selecting programs and sensitivity and the other for initial set-up and
overall control; non re-settable sequence code logs all attempts to
access the settings. Audible alarm reports any unauthorized attempt at
access
Construction
Attractive scratch and mar-resistant laminate with resilient end caps;
control panel and cross members of heavy duty aluminum.
Control Outputs
Solid state switches (low voltage AC or DC) for operating external
alarms and control devices.
Traffic Counter
Built-in and re-settable with current reading easily available on LCD
panel
Synchronization
Multiple channels permit several CS 5000s and other Garrett detectors to
operate simultaneously in close proximity
Interference Suppression
100% sensor coil Faraday shielding; special Garrett built-in circuitry
for noise suppression and ignoring x-ray monitors. Physical interference
minimized by coil design and circuitry
Alarms
Green Ready light indicates unit is operational; Red alarm lights and
audible alarm is activated when the target amount of metal is detected.
Infrared Sensor
Improves analysis of detection signal; increases throughput; helps
eliminate "false alarms" also provides accurate traffic counter.
Masking
Programs designed to eliminate the problem of dissimilar targets
canceling each other
Warranty
Limited 24 months, parts and labor
Dimensions
| |
Passageway |
Exterior |
Shipping |
| Width |
30" (0.76 m) |
35" (0.9 m) |
33.5" (0.851 m) |
| Height |
80" (2 m) |
87" (2.2 m) |
91.5" (2.324 m) |
| Depth |
23" (0.58 m) |
23" (0.58 m) |
6.25" (0.159 m) |
|
©
Tech CCTV. All Rights Reserved