|
Pelco’s remote monitor kit
(IPS-RMK), remote data port (IPS-RDPE-2), and remote monitor cable (IPS-CABLE)
are field service tools designed to assist in the installation and servicing
of Spectra III SE/Spectra III, ExSite, Esprit, or any pan/tilt that uses
Pelco’s D protocol. Use these tools at the installation site to observe
video, verify the operation of the PTZ controls, check the address and baud
settings, and program the positioning system. Software upgrades* also can be
performed with Spectra III SE/Spectra III domes. Remote
Monitor Kit (IPS-RMK)
• Includes PDA, Monitor, IPS-CABLE, and Carrying Case
• Plugs into the RJ-45 Port of the Spectra III™ SE/Spectra III Dome Drive or
IPS-RDPE-2
• Spectra III SE/Spectra III System – PTZ Control, Full Programmability, and
Software Upload Capabilities
• ExSite™/Esprit® System – PTZ Control and Full Programmability When Used
with the IPS-RDPE-2
Remote Data Port (IPS-RDPE-2)
• Designed to Provide Ground Level, Local Interface to Spectra III and
ExSite™/Esprit Series Systems When Using IPS-RMK or IPS-CABLE
• Mounts to a Pole or Wall Near Positioning System
• One Remote Data Port is Required Per Positioning System
Remote Monitor Cable (IPS-CABLE)
• Serial Interface Cable for a Windows®-Based PC, Palm™ OS Compatible
handheld, or iPaq™ Pocket PC
• Connects to Spectra III SE/Spectra III Dome Drive or IPS-RDPE-2 |