|
|
The ICD-828
[NTSC]/828P [PAL] (1/2" CCD) feature a high-sensitivity CCD
imaging sensor with about 380,000 pixels (NTSC) or about 440,000
pixels (PAL), delivering reduced smear, enhanced sensitivity,
and high image quality. The camera helps achieve surveillance
under various conditions, such as indoor and traffic monitoring,
at a high level of sophistication.
|
|
Low Smear and High Sensitivity
The ICD-828/828P(1/2" CCD) employ a
high-sensitivity on-chip lens CCD. The smear level is -126dB for
the ICD-828/828P. They also achieve a high sensitivity with a
minimum object illumination of 0.15 lx/F1.4 for the
ICD-828/828P. These cameras are ideally suited for outdoor
surveillance, such as traffic monitoring.
Spot Backlight Compensation
The camera is capable of specifying
only a backlight area displayed on the screen and reproducing
the backlight scene as an optimal image. Even when, for example,
a car's number plate or a person is captured in a backlight
situation, its image can be reproduced crisply.
Auto White Balance
In
addition to Auto White Balance (ATW1) of auto-tracking type, the
camera also features ATW2 that is compatible with sodium-vapor
lamps used for lighting on highways and other purposes. Thus, it
can capture optimal video under various conditions, both indoors
and outdoors.
AES (Automatic Electronic Shutter)
The camera boasts AES capability
with a sensitivity ratio of about 1:1600 (NTSC) or 1:2000 (PAL).
Even with a fixed-aperture lens, the sensitivity can be adjusted
appropriately according to changes in illumination of the
surveillance area.
*These feature cannot be
used in geographical regions where the line frequency and the
camera's vertical frequency are different from each other.
High Picture Quality
It delivers 480 lines of horizontal resolution. Incorporating
state-of-the-ar1 digital process circuitry, the camera can
reproduce a rock- solid, sharp image.
Remote Setup
The
pushbutton located on the rear of the camera allows various
setups to be customized. With the aid of the RCU-701 Remote
Control Unit >>>> or RSU-871 (RS-232 control), you can set up
the camera installed on the top of the building or at any
elevated place by use of the same cable as the video coaxial.
Setup Function
Local Setup(Using 5 buttons and
set on OSD(On Screen DiSplay) Color/Black & While Mode
select/Level Adjusl, Camera ID, AES/Electronic Shutter. BLC
ON OFF SPOT Level Adjust, GENLOCK Phase Adjusl, DO Iris
Level, INT/LL, Delail Level, AGC ON/OFF, White Balarce,
CROMA Level, PED Level, HUE, Operation Lock
Remote Setup Function
With Using RCU-701 or
RSU-871(Mutliplex transmission system), All Locai serup
Functions are availabie
|
Specifications
| Pickup
Device |
1/2" Interline
Transfer CCD [ICD-828/828P] |
| Picture
Elements |
NTSC.768(H)X494(V),
380,000 pixels approx |
| PAL .752(H)X582(V),
440,000 pixels approx. |
| Sync
System |
Internal.Crystallock or Line-Lock(AC type) |
| External:GENLOCK
|
| GENLOCK
input |
VBS or VS 1.0Vp-p
/75 ohm (High impedance Switchable) |
| BBS 0.45Vp-p /75
ohm (High impedance Switchable) |
| Video Output
|
VBS 1.0Vp-p /75 ohm |
| Horizontal
Resolution |
480TV Line
|
| S/N
Ratio |
52dB(p-p/rms) or
more[ICD-828/828P] |
| (Under luminance,
Standard Illumination, Detail off, Weight on) |
| Minimum
lllumination |
0.15 Ix/F1.4(AGC
ON) [ICD-828/828P] |
| AGC |
ON(AGC, Hyper
AGC)/OFF(LOW, MID, HIGH)Switchable |
| White Baiance
|
ATW/ATW2/AWC/MAN.
Selectable, Adjustable |
| Detaii Compression
|
Built in (Level
Adjustable) |
| Back Light
Compensation |
ON/OFF/SPOT
Switchable |
|
Automatic Eiectronic Shutter |
ON/OFF Switchable
AES Range NTSC.1:1600 / PAL .1:2000 |
| (Unable to work
when power frequency does not meet vertical frequency of the
camera) |
|
Electronic Shutter |
OFF,
1/100(1/60.PAL), 1/125, 1/500, 1/1,000, 1/2,000, 1/4,000,
1/10,000,VARIABLE |
| VARIABLE.1/60(1/50
PAL) -1/100,000 |
| Auto Iris Function
|
Video Iris/DC Iris
Switchable |
| Camera ID
|
Built in 1 line, 16
characters |
| Lens Mount
|
CS Mount(C mount
Adaptor can be used) |
| Flange Back
|
Built in
(Adjustment Mechanism) |
| Power
Requirement |
AC24V ±10%
60Hz/DC12V(10.5V-28V) (NTSC) |
| AC230V ±15% 50Hz
(PAL) |
| AC24V ±10%
50Hz/DC12V(10.5V-28V) (PAL) |
| Power Consumption |
Less than 4.5W
|
| Ambient Temperature
|
-10° C to
+50°C(13.5° F to 122° F) |
| Camera Mount
|
1/4"-20UNC(Upper
bottom select) |
| Dimensions
|
W64XH54XD120mm(W136XH213XD473 Inches) |
| Weight |
|
|
AC24V/DC12V |
ICD-828/828P 570g
Approx.(1.26 Ibs) |
| AC230V |
ICD-828/828P 670g
Approx.(1.48 Ibs) |
|
Input/Output Connector |
VBS Output: BNC
|
| GENLOCK Input: BNC
|
| LENS:
4P(E4-191J-100) |
| AC24V/DC12V Input:
2P push in terminal |
|
Accessories |
Operation Manual |
| C Mount Adaptor
|
| Auto Iris Connector
|
| (E4-191J-100 or
Equivalent) |
|
